It is important to follow our instructions for application of our stickers to achieve the best possible result.
We recommend you to read all of our instructions before applying our stickers.
You can also watch our instructional video for a walkthrough of the entire process.
Instructions: How to apply Wall Stickers, We represent two ways:
First of all, you have to place your sticker on a flat surface (table), and cross over the decal with squeegee,
just several times. You also have to make sure that the surface (where you want to apply your decal) is clean.
Put the decal in the desired position on the wall and hold in place with masking tape at the top with two
vertical strips and also apply a centre hinge with masking tape as well. Make sure that you’ll be satisfied with
the placement, because this is where your decal is going to be applied.
Remove the two top masking tape strips and peel off the top layer (transfer paper) toward yourself removing
the sticker from the backing paper making sure the decal lifts cleanly from the backing.
Cut the backing paper off just leaving the transfer paper and the decal, just be sure that the decal wouldn’t touch
the wall.
Now you can apply the decal to the wall using the squeegee pushing the air out as you go.
As the top half of the decal has now been applied remove the centre masking tape and apply the bottom
half in the same way as you did the top.
Cross over the decal with the squeegee to make sure it's stuck to the wall.
Slowly peel back the top layer (transfer paper) at a 180 degree angle back on itself making sure the decal
stays on the wall, if the decal comes away re-squeegee the decal.
Your decal is successfully applied on your wall, enjoy.
